VERIFIX-UV glue B 678 85g

1. Product Description

suitable for surface bonds with float glass, tempered glass, laminated safety glass, metal, wood, stone and different plastics - elastic - crystal clear - UV curing, light curing - Shelf life in original packaging: 12 months from the date of manufacture

This UV-curing adhesive is crystal clear and has medium viscosity. It shows good capillary properties with glass up to 6mm. Due to its elasticity, this adhesive is ideal for bonding many different material combinations. It also has the capacity to absorb vibrations in the bonding joint. Especially interesting, however, is its suitability for bonding laminated safety glass, where the PVB film absorbs much of the UVA radiation. Because this adhesive is made to also cure by daylight, it reacts with the remaining radiation (above 380 nm) and cures. Butt joints are no problem, even when multi-laminated units are involved: the adhesive does not affect the PVB layers. „Lamifix" adhesive is ideal for bonding laminated glass to laminated or ordinary glass, but also to wood, stone, metal and many thermoplastics. When bonding thermoplastics you should always do intensive testing first because not all thermoplastics can be bonded without problems.This UV-curing adhesive is crystal clear and has medium viscosity. It shows good capillary properties with glass up to 6mm. Due to its elasticity, this adhesive is ideal for bonding many different material combinations. It also has the capacity to absorb vibrations in the bonding joint. Especially interesting, however, is its suitability for bonding laminated safety glass, where the PVB film absorbs much of the UVA radiation. Because this adhesive is made to also cure by daylight, it reacts with the remaining radiation (above 380 nm) and cures. Butt joints are no problem, even when multi-laminated units are involved: the adhesive does not affect the PVB layers. „Lamifix" adhesive is ideal for bonding laminated glass to laminated or ordinary glass, but also to wood, stone, metal and many thermoplastics. When bonding thermoplastics you should always do intensive testing first because not all thermoplastics can be bonded without problems.

2. Fields of Application

bonding laminated glass units

bonding little light-permeable glasses (coloured glass)

Three dimensional glass constructions

3. Suitable Bonding Materials

laminated glass to ordinary glass

laminated glass to wood

laminated glass to laminated glass

laminated glass to metal

laminated glass to stone

laminated glass to some thermoplastics

4. Characteristics

Material Basis Methacrylic Ester

Colour Glass clear

Density Approx. 1.03 g/cm³

Flash Point Approx. 89°C

Viscosity Approx. 600 mPa·s

Consistency medium viscous

Gap Width 0.06 - 0.03 mm

Hardness Approx. 30 Shore D

Shear Strength Approx. 9 N/mm²

Temperature Resistance -40°C to +100°C

Linear Shrinkage Approx. 2,2%

Storage Shelf life in original container cool, dry, dark location (without UV radiation) note expiration date on bottle