Mirror-suspension 100 x 100 mm

without Double-Face-Tape

Suspension plate with punched eyelet for mounting mirrors and glass. The maximum load is doubled when using two plates, provided that an even weight distribution and horizontal hanging is guaranteed.

Application: The surface to be bonded must be free of dust, dirt and grease. Carefully position the sheet metal, depending on the adhesive used, press down with a pressure force of at least 15 kg and repeat this procedure after 10 minutes. Allow to rest until final adhesion is achieved.

Important information:

- Maximum load does not increase with more than 2 sheets

- Glue only on a smooth, even and non-absorbent surface

- Only use suitable adhesives, here the recommendations of the respective manufacturer are to be followed exactly

Due to the variety of possible influences, we cannot accept any liability for bonding to materials other than those specified here. On other surfaces and materials, the adhesive force must be tested at your own responsibility. We do not accept any liability in this case.