Mirror-suspension 100 x 100 mm

Max. load 6 kg

Self-adhesive hanging plate with punched-out eyelet for mounting mirrors and glass. Also suitable for rooms with high humidity at times. The maximum load capacity doubles when two sheets are used, provided that an even weight distribution and horizontal hanging is ensured.

Application: The surface to be bonded must be free of dust, dirt and grease. Position the sheet carefully, press down with a pressure of at least 15kg and repeat this process after 10 minutes. Allow to rest for 24 hours until final adhesion is achieved.

Important information:

• Maximum load does not increase with more than 2 sheets.
• Only bond at room temperature (approx. 20°C).
• Use within 6 months after receipt.
• Adhere only to a smooth, flat and non-absorbent surface.
• Not suitable on coatings such as cork, rubber, foils, hardboard.
• May react with paint, ink, acrylic, paint oils and similar substances.

Due to the variety of possible influences, we cannot accept liability for adhesion to materials other than those specified here. On other surfaces and materials, test the adhesive strength at your own responsibility. We accept no liability in this case.